Industrial structure

The Tn&Platex group has 11 factories: 6 spinning mills, 3 weaving mills, one stocking and seamless factory, and one sanitary chinstrap factory, distributed in 6 industrial plants totaling 160,000 m2 covered. In addition, the group has a Central House, a Distribution Center and a HVI Laboratory, for the analysis of cotton. A structure that makes it clear that TN&Platex is a large-scale company worldwide.

Planta de Monte Caseros

Hilados Open end – Tejido de Puntos – Medias – Seamless

The cornerstone of this factory, the first of the TN&Platex group, was laid in November 1979. From its origin to 2010, the initial production volume multiplied fourteen times. It is located in a strategic location for the group, since it is a tripartite point between Argentina, Brazil and Uruguay.

Plant location: Armenia 501 (3220), Monte Caseros, Corrientes province
Built meters: 32,000 m2 on a 70-hectare site
Equipped with machinery: Rieter, Savio, Mayer, Lonatti, Santoni, Schlafhorst, Trutzschler

Planta de la Rioja 1

Hilados Cardados – Peinados

La Rioja 1, inaugurated in 94, is a model spinning mill, designed after a trip to 11 countries, visiting 40 spinning mills, which allowed the flow of raw materials to be optimal, with the necessary automation to obtain the best quality with volume. An extremely important plant for the development of our company, that was the beginning of the exponential leap that allowed us to grow to become the most important spinning mill in the southern hemisphere.

Location of the plant: La Rioja Industrial Park
Built meters: 17,000 m2 covered
Equipped with machinery: Rieter, Marzoli, Salvio, Baiyang and Mayer

Planta de la Rioja 1

Hilados Cardados – Peinados

La Rioja 1, inaugurated in 94, is a model spinning mill, designed after a trip to 11 countries, visiting 40 spinning mills, which allowed the flow of raw materials to be optimal, with the necessary automation to obtain the best quality with volume. An extremely important plant for the development of our company, that was the beginning of the exponential leap that allowed us to grow to become the most important spinning mill in the southern hemisphere.

Location of the plant: La Rioja Industrial Park
Built meters: 17,000 m2 covered
Equipped with machinery: Rieter, Marzoli, Salvio, Baiyang and Mayer

Planta de la Rioja 2

Hilados Cardados – Peinados

He joined the group in 2004, after the purchase in a judicial auction. Today the plant also has a laboratory plant, where new yarns are prepared and work is done on the quality and constant improvement of our productions, both in yarn and fabric.

Plant location: La Rioja Industrial Park
Built meters: 18,000 m2 covered, on a 5-hectare site
Equipped with machinery: Rieter, Marzolli, Trutzschler and Savio

Planta de Catamarca

Hilados Open end

He joined the group in 2007, after the purchase from the Karamanian family. In 2010, after the serious fire suffered two years ago, the plant reopened its doors. With technology at the forefront of the international industry, COTECA again produces OE yarns in the province of Catamarca.

Location of the plant: National Route No. 38 KM 1305 CP (4700)
El Pantanillo Industrial Park of the Capital of the province of Catamarca
Built meters: 10,000 m², on a 15-hectare site
Equipped with machinery: Trützschler, Schlafhorst

Planta de Tucumán 1

Hilados Peinados – Cardados – Diferenciados — Tejido de Punto

He joined the group in 1996, after the purchase from La Plata Cereal. It has 4 production lines, which give it great industrial flexibility. In 2017 12 Mayer looms were set up and in the coming years the production of Fabric in this factory will increase considerably.

Location of the plant: Route 304 km 11.5 (4178) Las Piedritas, Province of Tucumán
Built meters: 17,000 m2
Equipped with machinery: Trützschler, Marzoli, Rieter, Mayer

Planta de Tucumán 2

Hilados Peinados – Cardados – Diferenciados

He joined TN&Platex in 2008, after the purchase from the San Nicolás group. Since then, a technological update has been started that has improved the quality of the yarns and increased production capacity by 50%.

Location of the plant: Route 304 km 10.5 (4178) Los Gutiérrez, Province of Tucumán
Built meters: 13,500 m2 on an 8-hectare site
Equipped with machinery: Trützschler, Marzoli, Rieter, Schlafhorst and Savio

Planta de Tucumán 2

Hilados Peinados – Cardados – Diferenciados

He joined TN&Platex in 2008, after the purchase from the San Nicolás group. Since then, a technological update has been started that has improved the quality of the yarns and increased production capacity by 50%.

Location of the plant: Route 304 km 10.5 (4178) Los Gutiérrez, Province of Tucumán
Built meters: 13,500 m2 on an 8-hectare site
Equipped with machinery: Trützschler, Marzoli, Rieter, Schlafhorst and Savio

Centro de Distribución Moron

Distribución

The TN&Platex Distribution Center, where the logistics of what is produced in the company’s 6 plants is centralized, is located in Morón, province of Buenos Aires.
All merchandise arrives on palletized and is unloaded daily. The distribution center has the capacity to deliver orders within 24 hours of receiving them.

Laboratorio de calidad

HVI de Algodón

Quality controls start with the raw material, through the analysis of the samples sent by the suppliers, and go from visual and tactile control to determine the grade and character of the cotton, to objective measurements through the HVI equipment. of the values ​​corresponding to the strength, elongation, thickness, length and content of impurities of the fiber. Strict controls throughout the entire process assure customers of the quality of the yarn.

Planta de la Rioja 2

Hilados Peinados 

Fifteen years after the construction of the Monte Caseros Plant to produce OE yarns, the group decided to add combed yarns to its product offering. To this end, in 1994 it built a factory in La Rioja with an initial capacity of 150 tons per month of combed yarn.

Plant location: Av. María Eva Duarte de Perón 1258 (5300)
Industrial Park of the Capital of the province of La Rioja
Built meters: 17,000 m², on a 5-hectare site
Equipped with machinery: Rieter, Truztcheler, Savio and Schlafhorst

Planta de Catamarca

Hilados Open end

He joined the group in 2007, after the purchase from the Karamanian family. In 2010, after the serious fire suffered two years ago, the plant reopened its doors. With technology at the forefront of the international industry, COTECA again produces OE yarns in the province of Catamarca.

Location of the plant: National Route No. 38 KM 1305 CP (4700)
El Pantanillo Industrial Park of the Capital of the province of Catamarca
Built meters: 10,000 m², on a 15-hectare site
Equipped with machinery: Trützschler, Schlafhorst

Centro de Distribución Moron

Distribución

The TN&Platex Distribution Center, where the logistics of what is produced in the company’s 6 plants is centralized, is located in Morón, province of Buenos Aires.
All merchandise arrives on palletized and is unloaded daily. The distribution center has the capacity to deliver orders within 24 hours of receiving them.

Laboratorio de calidad

HVI de Algodón

Quality controls start with the raw material, through the analysis of the samples sent by the suppliers, and go from visual and tactile control to determine the grade and character of the cotton, to objective measurements through the HVI equipment. of the values ​​corresponding to the strength, elongation, thickness, length and content of impurities of the fiber. Strict controls throughout the entire process assure customers of the quality of the yarn.

Large producers of Yarn,
And Pride